Q: What are my options for replacing the worn out marine carpet on my boat?
A: If the worn carpeting is glued to the boat floor, replacement will require tearing out the existing carpeting, and installing the new carpet of a similar style and color. Or, if you do not want to go to the effort and expense of a tear out, you may template the floor and order an AquaMat™ that will lie on top of the existing carpeting.
Replacing a removable boat mat is easy - make a template of the existing mat if the shape is still in acceptable condition. Or, make a new template of the area you want to cover, and Corinthian will make a custom AquaMat™ to your exact specifications.
Q: What is the difference between a pre-cut kit and a custom AquaMat™?
A: Pre-cut kits are for replacement of glue-in carpet typically found on runabouts, pontoon boats and bass boats. Whereas, a custom AquaMat™ is designed to cover fiberglass decks common in large runabouts, cruisers and yachts. However, an AquaMat™ can also be used to cover worn carpeting to save the tear out expense.
Q: What makes marine carpet different from standard residential carpet?
A: Marine carpet is designed to withstand the tough marine environment without fading or degrading. It is produced from solution dyed fibers enhanced with UV stabilizers that protect it from extreme sun, salt and moisture.
Q: What type of glue do you recommend for marine carpet?
A: Standard marine adhesive from a reliable, known company is your best option. Since we do not have partnerships with glue manufacturers, we do not promote any particular brand.
Q: How do I care for marine carpet?
A: Marine carpeting is easy to maintain. It requires occasional hosing off and vacuuming. Use standard high quality carpet cleaner to remove stubborn stains, always being careful to remove all cleaner residue with water.
Q: How do I care for a custom AquaMat™?
A: Maintain the carpet face by hosing or vacuuming off. An AquaMat™ should dry completely before storing. When storing, always roll the AquaMat™ carpet face out.
Q: How do I make a template for a custom AquaMat™?
A: Follow these instructions on how to make a template.
Q: How do I get samples for your marine carpet?
A: Complete our marine carpet sample request form, including the colors and styles that are the best match for your project. We will send you a custom package based on your request.
Q: What marine carpet is used for a custom AquaMat™?
A: Any carpet style except for the Basic and Deluxe Cut Piles can be used in AquaMat™ production.
Q: What binding is used for a custom AquaMat™?
A: A custom AquaMat™ is bound using marine grade vinyl binding that is color coordinated with the carpet color you specify.
Q: How do I know which boat carpet style to choose?
A: There are few limitations to the carpet style best suited for a boat. With the exception of the berber construction, any carpet can be used in a glue-down application. Except for the Basic and Deluxe Cut Piles, any style can be used in custom boat mats. You only need to monitor hatches and lids to be sure the pile or thickness is not an issue. Ultimately, the decision comes down to taste and budget.
Q: How do I measure to determine how much marine carpet I will need?
A: Measure the length and width of the area to be covered, add additional for hull sides and locker areas. We can assist you in converting the dimensions to square yardage.